Skip to docs navigation

09.08 Printing on Ender 3 S1

On this page
  1. Save the gcode file from Cura to an SD card.
  2. Put the SD card in the printer.
  3. Turn on the Ender 3 S1 printer and select “Prepare”
  4. In the “Prepare” menu select “Preheat PLA” - this will heat up the bed and the extruder head
  5. After this is complete go to the main menu
  6. Select “Print”
  7. Find your file and press “Print”
  8. Watch the print as it starts to make sure there are no mistakes.

If you have questions or need to change the filament, don’t hesitate to ask.