05.02 Convert Shirt and Pants to Jumpsuit Pattern
To transition from a shirt and pants pattern to a custom jumpsuit, you’ll need to account for specific design features and functional details to ensure you can get into your jumpsuit and it fits well. Below are some pointers to help you incorporate these elements effectively.
How Will You Put the Jumpsuit On?
The jumpsuit must open or stretch in someway to allow the wearer’s body to fit inside. Decide how you plan to put on the jumpsuit as early as possible since it is a foundational part of the jumpsuit pattern design. The opening needs to close securely after being worn.
Common Jumpsuit Opening Locations
- Center front opening
- Center back opening
- Side seam opening
- Crazy stretchy elastic neck opening
- Separating waist opening
Jumpsuit Opening Closure Methods
Ties
Buttons
Accounting for a Long Zipper
- Decide if the zipper will go from the collar down to the waist, or extend all the way to the crotch for easy wearability. Make sure the zipper is long enough to accommodate putting on and taking off the jumpsuit comfortably.
- The zipper is typically placed along the center front of the jumpsuit. Ensure that the zipper lies flat and that the seam allowance accounts for the bulk of the zipper tape. For a more concealed look, consider adding a zipper facing or placket.
- Add a 3/8" to 1/2" seam allowance along the center front seam where the zipper will be attached. If you want a clean finish, consider adding an extra 1/4" to 1/2" for a zipper facing or placket.
Adding a Collar
- You can choose from various collar types (e.g., a ribbed collar, shirt collar, or mandarin collar). Each style will require different construction methods, so decide based on your desired aesthetic.
- To draft the collar, measure the neckline of your jumpsuit pattern (front and back) and draft a collar piece that fits perfectly around it. Ensure the collar seam allowance is consistent with the neckline seam allowance (usually 1/4" to 1/2").
- If your collar has a stand, add an extra piece to the pattern, typically 1" to 1.5" high. A collar stand adds structure and helps the collar sit properly around the neck.
3. Adding Extra Fabric for Movement
- Since jumpsuits are a single garment, it’s important to ensure ease and mobility. Add extra width to the torso, sleeves, and legs if needed. For example:
- Add 2-4 inches of length between the crotch and shoulder for comfort and to prevent the jumpsuit from feeling tight when sitting or bending.
- Add 1/2" to 1" of width to the sleeve pattern for extra arm movement.
- You may need to adjust the width or shape of the leg for comfort, especially around the hips and thighs.
- If the jumpsuit is designed for a dropped or relaxed fit, add extra space in the crotch area by lowering the crotch seam.
4. Customizing the Jumpsuit Design
Flared Legs
To create flared legs, widen the leg pattern from the knee down. Use a ruler to angle the side seams outward, creating the desired flare. The more you angle the seams, the wider the flare will be.
Spikes, Big Shoulders, or Shoulder Pads
If you want exaggerated shoulders, you can either add extra width to the shoulder pattern or use shoulder pads. For spikes or dramatic shapes, you can sew stiff interfacing or add additional structural materials inside the garment.
Dropped Crotch
For a relaxed, streetwear-style fit, lower the crotch seam by several inches. This will create a looser, more comfortable fit, particularly around the hips and thighs. Be sure to balance the design by extending the torso.
Belt Loops and Waistbands
If you plan to add a belt to your jumpsuit, include belt loops at evenly spaced intervals, typically 5-7 loops around the waist. To add a waistband, draft a separate waistband piece that will attach at the waist seam. Add seam allowances to both the waistband and the body pieces.
Pleats
Pleats add volume and texture to a garment. To add pleats to your jumpsuit, extend the width of the pattern piece by 2x or 3x the desired pleat depth. Then, fold the pleats into the garment when constructing the jumpsuit. Pleats can be added at the shoulders, waist, or legs for a dramatic effect.
5. Pattern Adjustments for Custom Design Elements
- Depending on your desired look, you can lengthen or shorten the torso, sleeves, or legs. When making length adjustments, remember to add extra fabric for hems at the ends of sleeves and pant legs.
- For every added feature, ensure you include appropriate seam allowances. For example:
- Add 1/8” on each side of the width of beltloops to account for folding.
- Double the desired width of the pleat when drafting, and remember to leave extra fabric for tacking the pleats down.
General Finishing Details
- Add 1-2" for hems on the pants and sleeves, depending on your planned fabric’s thickness.
- Cuffs and sleeve plackets can be added to the ends of sleeves for a more structured look.
- Topstitching along seam lines such as the zipper, waistband, and sleeve cuffs adds durability and a polished appearance.
- If you want to include pockets in your design (e.g., patch pockets, cargo pockets), be sure to account for the extra fabric needed for pockets and seam allowances.
Finalize the Jumpsuit Block
- Ensure all seams transition smoothly and are free of sharp angles.
- In can be a good idea to indicate notches, grainlines, to more easily match points on your pattern when sewing.
- Verify that inseams and outseams match on both front and back pieces.
Label Pattern Pieces
- Clearly label each piece with its name, cut quantity, grainline direction, and any special instructions (e.g., “Cut 2 on fold,” “Add interfacing”).