07.05 Speakers and Amplifiers

1. Make sure the amplifier is turned off. This is important to avoid damaging your equipment.
2. Connect the speaker wires to the amplifier terminals. Most amplifiers have two sets of terminals, one for the left speaker and one for the right speaker. The terminals are usually color-coded, with red for positive and black for negative. Make sure to connect the positive wire from each speaker to the positive terminal on the amplifier, and the negative wire from each speaker to the negative terminal on the amplifier.
3. Connect the speaker wires to the speakers. Most speakers have two terminals, one for positive and one for negative. Again, make sure to connect the positive wire from each speaker to the positive terminal on the speaker, and the negative wire from each speaker to the negative terminal on the speaker.
4. Turn on the amplifier. Once all the wires are securely connected, you can turn on the amplifier. Start with the volume turned down low, and then gradually increase it until you reach a comfortable listening level.

Tips

• If you are unsure about how to connect your speakers to your amplifier, consult the instruction manuals for both pieces of equipment.
• Never exceed the maximum wattage rating of your speakers. If you play your speakers at too high of a volume, you can damage them.
• Be careful not to cross the speaker wires. If you accidentally cross the positive and negative wires, you can create a short circuit, which can damage your amplifier.